THE BEST GEAR FOR YOUR RENTAL
THE BEST GEAR FOR YOUR RENTAL
Check all the information of models, features and sizes of the accessories that we put at your disposal.
Basic Kit (helmet and jacket): 20€/day
Full Kit ( helmet, gloves, boots, pants and jacket): 40€/day
We know that in order to ride comfortably, the jacket and pants must fit correctly. If they squeeze too much they become uncomfortable and they do not let us concentrate, and in waterproof garments they can force the heat-sealed seams and cause the water to penetrate them.
If the garments are too loose they can flake during driving and the protections can move and endanger your safety.
Pass a tape measure down the back and under the arms. Take the measure in the widest part of the chest. This measure is equivalent to the jacket size you need, for example 42 in. or 104 – 107 cm, correspond to size 42 or M of jacket.
The chest measurements shown in the size chart show the actual measurements of the jacket. These measures take into account the natural way to maintain comfort.
Measure the waist just above the edge of the pants. Make sure you are standing in a comfortable position and do not vacuum, as the pants should be comfortable when driving.
Measure by the widest part of your hips.
Removable inner jacket with lightweight GORE-TEX® 3-Layer technology. Extremely light, space-saving liner which can be worn separately when off the bike.
Non-waterproof outer jacket.
Storm cuff at sleeves.
Air vents directing maximum flow through main body.
Action back for comfortable fit whilst riding.
Sleeve adjustment for a controlled and personal fit, whilst helping to maintain the correct positions of the protectors.
Main Fabric Texland #4609 outer fabric.
Gore-Tex® 3L Paclite separate jacket.
CE certified to EN 1621-1 2012 removable D3O protectors, Shoulder and Elbow.
CE certified to EN 1621-2 2014 removable D3O BP3 back protector.
CE certified to prEN 1621-3 2016 removable D3O CP1 Chest protector.
2 water repellent zipper pockets.
1 patch pocket.
1 hand warmer pocket.
1 large lower back pocket to store removable Gore-Tex® jacket when not in use
Stash away hood on Gore-Tex® jacket.
Constructed from 3-layer GORE-TEX®</sup< Pro fabric strengthened with ARMACOR™ product technology for exceptional waterproofing & breathability
GORE-TEX® garments have a water resistant treatment called DWR applied to the outer fabric which allows the water to bead up and roll of the fabric rather than soaking in.
3D mesh double layer seat to avoid reverse transmission.
Connection zipper to match to any Triumph jacket.
GORE-TEX® Misano fabric.
GORE-TEX® Geko 3L stretch fabric on inner crotch for comfort & flexibility of movement.
ARMACOR™ product technology on knee panels.
CE certified to EN 1621-1 2012 removable D3o protectors, Knees and Hips.
Reflective detailing for increased rider visibility.
2 water repellent zipper pockets on front.
1 water repellent zipper pocket on back right.
Additional webbing belt with cam buckle.
Adventure style motorcycle boots, with TriTex waterproof lining and offering all the comfort and protection necessary for your trip.
Full grain leather with vintage finish.
TriTex-Waterproof, windproof and breathable membrane.
Closing system with triple adjustable buckle.
Adveture lightweight rubber sole in double density non-slip.
GH® unbreakable plastic buckles protection pad.
Between sole of special rigid nylon with steel sheet.
Ankle area reinforced with TPU protectors.
Plastic shin protectors.
CE certification to EN13634.
The perfect complement to the Exploration and Quest jackets along with the pants. These gloves are waterproof and can be used in all seasons of the year.
Leather outerwear and multi-layers Lining with waterproof, windproof and breathable.
Tritex technology D3o® protectors on the knuckles Knox®.
Protectors for the scaphoid located in the palm.
Aluminum thermal insulation.
Reflective laminated panels for greater night visibility.
Index finger with driving technology for use with mobile and navigation systems.
Silent and proven aerodynamic tunnel design for maximum comfort.
Airfit concept®: thanks to its very easy to use pump placed under the tether strap, the side foams are inflated and deflated.
The helmet fits in this way to the shape of the cheeks, as if it had been molded to measure for you, attenuating the parasitic noises.
Exclusive scorpion exo.
Visor with three positions and security lock ellip-tec equipped with the most effective technology against the formation of fog: the maxvision pinlock that does not create any visual discomfort.
Kwikwick2® fabric interior with triple density pads, recognized for offering better moisture absorption and optimal skin breathability.